Three methods to set up a universal remote control
Method 1: Quick Digital Input Method Step 1: Look up the three-digit code that represents the TV you want to control from the code table. Step 2: Press and hold the Setup button, then press the Power button, and then release both buttons. At this point, the working indicator light will turn on. Step 3: Enter the three-digit code you found, such as 083. After entering one digit, the indicator light will flash once. Once all three digits are entered, the working indicator light will turn off, and the setup is complete. You can now use this remote control to operate your TV.
22-08-29
Method 1: Quick Numeric Input Method
Step 1: Look up the three-digit code that represents the TV you want to control from the code table.
Step 2: Press and hold the 'Setup' button, then press the 'Power' button, and then release both buttons. At this point, the working indicator light will turn on.
Step 3: Enter the three-digit code you found, such as 083. After entering one digit, the indicator light will flash once. After entering all three digits, the working indicator light will turn off, and the setup is complete. You can now use this remote control to operate your TV.
Note: If there is more than one code found, first try the first set of codes. If the TV brand is not in this code table, try the first or third method. If the indicator light flashes continuously two times or more, it indicates that the entered code is incorrect, and you need to re-enter the three-digit code.
Method 2: Automatic Digital Search
Step 1: Manually turn on the power switch of the TV you want to control, so that the TV is in a program state.
Step 2: Point the remote control at the TV, press and hold the 'Setup' button, then press the 'Power' button, and then release both buttons. At this point, the working indicator light will turn on.
Step 3: Press the volume (+ or -) button on the remote control once, and pay attention to whether the volume on the TV is increasing (or decreasing). Repeat this operation until the volume on the TV is increasing (or decreasing), then stop the operation and press the 'Setup' button. At this point, the working indicator light will turn off, and the setup is complete.
Note: The [Volume +] button is for forward search, and the [Volume -] button is for backward search. You can switch between them during the search. If you are using [Volume +] and the [Volume -] symbol appears without stopping in time, you can use [Volume -] to quickly return.
Method 3: One-Key Quick Search
Step 1: Turn on the TV.
Step 2: Point the remote control at the TV, press and hold the [Setup] button for a few seconds until the indicator light turns on, then release it.
Step 3: Press the [Power] button once, the indicator light will flash continuously, entering automatic search. When the TV shows the [Mute] symbol, immediately press the [Setup] button twice, and the indicator light will turn off, completing the code search.
Note: Check if each button function is normal. If there is any abnormality, reset it until the correct code is found.
Tag:
Previous Page:
